የ12ኛ ክፍል ውጤት ወጥቷል፤ ውጤትዎን የሚያዩበት መንገድ

የ11ኛ ክፍል ግብርና ምዕራፍ 3

Cotton and sisal: getting the fibre out

4 ደቂቃ · የተሠሩ 2 ያለፉ የፈተና ጥያቄዎች

የትምህርቱ ክፍሎች

ትምህርቱን ከዚያ ጀምሮ ለማጫወት አንድ ክፍል ይንኩ።

የ11ኛ ክፍል ግብርና ምዕራፍ 3 የ4 ደቂቃ የ Temari ቪዲዮ ትምህርት፦ Cotton and sisal: getting the fibre out። 2 ያለፉ የፈተና ጥያቄዎችን ደረጃ በደረጃ ይሠራል። ትምህርቱ የሚናገረው ሁሉ ከቪዲዮው በታች ተጽፏል። ትምህርቱ በእንግሊዝኛ ነው።

ስለ ምዕራፍ 3 ተጨማሪ

የምዕራፉ ገጽ Temari በዚህ ምዕራፍ ላይ ያለውን ሌላውን ይዟል፤ ለምሳሌ አጭር ማስታወሻዎችና የመልመጃ ጥያቄዎች ከመልሶቻቸው ጋር።

የምዕራፍ 3 ገጽ ይክፈቱ

ትምህርቱ የሚናገረው ሁሉ

የትምህርቱ ቃላት በየክፍሉ። ትምህርቱን ከዚያ ጀምሮ ለማጫወት ሰዓቱን ይንኩ።

0:00Introduction

Cotton and sisal are both fibre crops. But the fibre sits in a different part of each plant, and it comes out by a different process. Learn the name of each step, and the practice questions on this chapter get much easier.

0:14Cotton: the fibre is lint

Start with cotton. Cotton produces lint. Lint is a soft, fluffy fibre that grows in a boll, a protective case, around the seed. The textile industry uses it as raw material.

Cotton needs a warm climate. It does not do well where rainfall is high, because the lint in the boll becomes discoloured, and that lowers the quality. Before planting, the seeds are often treated with acid to remove their hairs. They are sown in rows one metre apart, with 30 centimetres between plants. Cotton takes six to seven months to mature. It is ready for harvest when at least half of the plants have their bolls burst open.

0:55From boll to cloth

After picking, cotton goes through several steps before it becomes cloth. The first is ginning. Ginning separates the seeds and plant debris from the cotton fibre. Then the fibres are cleaned of dust and other impurities.

Next, at a textile mill, spinning twists the raw fibres into a thread. Finally, weaving turns the thread into fabric, or cloth. So keep the order: ginning, then spinning, then weaving.

1:26Practice question 1ያለፈ ፈተና

Here is a practice question. What is the process of separating seeds and plant debris from cotton fibre called? Pause the video, and try it.

That is the very first step after picking. It is ginning, and it comes even before cleaning. The answer is B. Spinning comes later, and it twists fibre into thread. Decortication is a sisal word: it scrapes fibre from a leaf. And weaving turns thread into cloth.

2:01Sisal: the fibre is in the leaf

Now sisal. Sisal gives hard fibres, used to make ropes, sacks and carpets. The plant resists drought, and grows on rainfall alone. And here is the key difference: the sisal fibre comes from the leaf. Young plants, called suckers or bulbils, are raised in a nursery, then transplanted. The first leaves are harvested two to three years later.

2:26From leaf to fibre

Leaves are ready when they reach about 1.2 metres high and 15 centimetres wide. Once cut, they are scraped, by hand or by machine, to separate the fibres from the leaf. This is called decortication. The fibre is washed and dried, then brushed to straighten it, graded by length and colour, and packed for market.

2:48Practice question 2ያለፈ ፈተና

Try this one. In sisal production, what is the term for the process of scraping the leaves, manually or mechanically, to separate the fibres? Pause, and try it.

Scraping the sisal leaf to free its fibre is decortication. The fibre is in the leaf, not around a seed. The answer is C. Ginning is the cotton step that takes out seeds. Spinning makes thread. And weaving makes cloth.

3:23Summary

So remember. Cotton is ready when at least half the bolls have burst open. Cotton goes from ginning, to spinning, to weaving. And sisal's fibre comes from the leaf, scraped out by decortication. Keep practising questions like these on Temari.et.

ይህን ምዕራፍ በመተግበሪያው ይለማመዱ

Temari ይህን ምዕራፍ ወደ ጊዜ የተቆረጠለት መልመጃ ይለውጠዋል፣ እየሠሩ ያርምዎታል፤ ያልገባዎትንም የሚያብራራ የ AI አስተማሪ አለ።

በነጻ ይጀምሩ

Temari.et ለ Android ስልኮች መተግበሪያ አለው፤ በ Google Play ላይ በነጻ ይገኛል።

ይግቡመለያዎን ይክፈቱ