የ12ኛ ክፍል ውጤት ወጥቷል፤ ውጤትዎን የሚያዩበት መንገድ

የምዕራፍ ማስታወሻዎችና የመልመጃ ጥያቄዎች

የ11ኛ ክፍል ፊዚክስ ምዕራፍ 6፦ Electrostatics እና Electric Circuit

በዚህ ገጽ ያለው ሁሉ ለ11ኛ ክፍል የፊዚክስ መፅሐፍ ምዕራፍ 6 ነው፦ ምዕራፉ የሚሸፍነው፣ አጭር ማስታወሻዎቹ፣ የመልመጃ ጥያቄዎች ከመልሶቻቸው ጋር፣ እና ቪዲዮ ባለበት የትምህርቱ ቪዲዮ።

ከ Google Play ያውርዱ
3
ካርዶች
10
የምዕራፍ 6 የመልመጃ ጥያቄዎች
217–286
የምዕራፍ 6 የመፅሐፍ ገጾች

የምዕራፍ 6 አጭር ማስታወሻዎች

በ11ኛ ክፍል የፊዚክስ ገጽ ላይ በዚህ ምዕራፍ ሥር የተመዘገቡት ካርዶች። አንድ በአንድ ይክፈቱ።

F=k∣q1q2∣r2F = k\frac{|q_1 q_2|}{r^2}
FF
በሁለቱ ነጥብ ቻርጆች መካከል ያለው የኤሌክትሮስታቲክ ኃይል መጠንNN
kk
የኩሎም ቋሚ፤ k = 1/(4 pi epsilon_0) = 9.0 x 10^9N m2 C−2N\,m^2\,C^{-2}
q1,q2q_1, q_2
ሁለቱ ነጥብ ቻርጆችCC
rr
በሁለቱ ቻርጆች መካከል ያለው ርቀትmm

መቼ እንደሚጠቀሙበት

በሁለት ነጥብ ቻርጆች መካከል ያለውን የኤሌክትሮስታቲክ ኃይል ሲፈልጉ በርቀት r ተለያይተው ሲሆን ይጠቀሙ።

ይጠንቀቁ

ርቀቱን ካሬ ከማድረግዎ በፊት ወደ ሜትር ይቀይሩ። ለምሳሌ 1.0 cm = 0.01 m ነው፤ ስለዚህ r^2 = 1.0 x 10^-4 m^2 ነው እንጂ 1.0 አይደለም። መሳብ ወይም መግፋት የሚወሰነው በቻርጆቹ ምልክት ነው፤ ቀመሩ አይወስነውም።

ከGrade 11 Physics፣ ገጽ 217-286 የተዘጋጀ፤ ከመውጣቱ በፊት ሁለት ጊዜ ተረጋግጧል

E=kQr2E = k\frac{Q}{r^2}
EE
ከነጥብ ቻርጁ በርቀት r ያለው የኤሌክትሪክ መስክ ጥንካሬN C−1N\,C^{-1}
kk
የኩሎም ቋሚN m2 C−2N\,m^2\,C^{-2}
QQ
መስኩን የሚያመነጨው ምንጭ ነጥብ ቻርጅCC
rr
ከምንጭ ቻርጁ እስከ ተፈለገው ነጥብ ያለው ርቀትmm

መቼ እንደሚጠቀሙበት

ከአንድ ነጥብ ቻርጅ በርቀት r ባለ ነጥብ የኤሌክትሪክ መስክ ጥንካሬ ሲፈልጉ ይጠቀሙ።

ይጠንቀቁ

መስኩ በሙከራ ቻርጅ q ላይ አይመረኮዝም፤ ስለዚህ በ q አያባዙ። ለብዙ ቻርጆች መስኮቹን በአቅጣጫቸው እንደ ቬክተር ይደምሩ እንጂ እንደ መጠን አይደለም። መስኩ ከአዎንታዊ ምንጭ ይወጣል፤ ወደ አሉታዊ ምንጭ ይገባል።

ከGrade 11 Physics፣ ገጽ 217-286 የተዘጋጀ፤ ከመውጣቱ በፊት ሁለት ጊዜ ተረጋግጧል

R=VIR = \frac{V}{I}
RR
የኮንዳክተሩ ወይም የተቃዋሚው ተቃውሞΩ\Omega
VV
በኮንዳክተሩ ላይ ያለው የአቅም ልዩነትVV
II
በኮንዳክተሩ ውስጥ የሚያልፍ ጅረትAA

መቼ እንደሚጠቀሙበት

ሙቀቱ ቋሚ ሆኖ ሲቆይ በብረት ኮንዳክተር ውስጥ ተቃውሞ፣ ቮልቴጅ ወይም ጅረት ሲፈልጉ ይጠቀሙ።

ይጠንቀቁ

የኦም ሕግ የሚሠራው ሙቀቱ ቋሚ ሲሆን ብቻ ነው። የፈትል መብራት ኦሚክ አይደለም፤ ሲሞቅ ተቃውሞው ስለሚጨምር የV-I ግራፉ ቀጥታ መስመር ሳይሆን ይጠማል። ይህንን ያስተውሉ።

ከGrade 11 Physics፣ ገጽ 217-286 የተዘጋጀ፤ ከመውጣቱ በፊት ሁለት ጊዜ ተረጋግጧል

የምዕራፍ 6 የመልመጃ ጥያቄዎች

በዚህ ምዕራፍ ላይ የተጻፉ 10 የምርጫ ጥያቄዎች፣ እያንዳንዳቸው መልሱና ምክንያቱ አላቸው። መልሱን ከመክፈትዎ በፊት ይሞክሩ። ጥያቄዎቹ በእንግሊዝኛ ናቸው።

ጥያቄ 1

According to the quantization of electric charge, how many electrons are needed to make a total charge of -1.0 C?

  1. A.6.25 x 10^18 electrons
  2. B.1.60 x 10^19 electrons
  3. C.6.25 x 10^-19 electrons
  4. D.1.60 x 10^-18 electrons
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ A 6.25 x 10^18 electrons

ምክንያቱ

Charge is quantized as q = ne. Dividing the charge 1.0 C by the elementary charge 1.6 x 10-19 C gives 6.25 x 1018 electrons.

ጥያቄ 2

Which of the following is a correct property of electric field lines?

  1. A.They cross each other at right angles.
  2. B.They begin on positive charges and end on negative charges.
  3. C.They are parallel to the surface of a charged conductor.
  4. D.Farther spaced lines indicate a stronger electric field.
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ B They begin on positive charges and end on negative charges.

ምክንያቱ

Electric field lines always begin on positive charges and radiate outward toward negative charges, where they terminate. They never cross each other and are always perpendicular to the surface of a charged body.

ጥያቄ 3

Which of the following pairs of units are both valid units for electric field strength?

  1. A.N/C and V/m
  2. B.J/C and V/m
  3. C.N/m and V/C
  4. D.A/m and N/C
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ A N/C and V/m

ምክንያቱ

Electric field strength is defined as force per unit charge (N/C), which is also mathematically equivalent to potential difference per unit distance (V/m): 1 N/C = 1 V/m.

ጥያቄ 4

A headlamp in a vehicle draws a current of 2.50 A when a potential difference of 12.0 V is applied across it. What is its resistance?

  1. A.0.21 ohms
  2. B.4.8 ohms
  3. C.14.5 ohms
  4. D.30.0 ohms
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ B 4.8 ohms

ምክንያቱ

Using Ohm's law, R = V / I. Substituting the values gives R = 12.0 V / 2.50 A = 4.8 ohms.

ጥያቄ 5

Two point charges of +2.0 nC and +8.0 nC are separated in air by a distance of 0.20 m. What is the magnitude of the electrostatic force between them? (Take k = 9.0 x 109 N m2/C2)

  1. A.3.6 x 10^-6 N
  2. B.7.2 x 10^-6 N
  3. C.3.6 x 10^-4 N
  4. D.1.8 x 10^-5 N
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ A 3.6 x 10^-6 N

ምክንያቱ

By Coulomb's law: F = k (q1 q2) / r2. Substituting the numbers: F = (9.0 x 109 x 2.0 x 10-9 x 8.0 x 10-9) / (0.20)2 = 1.44 x 10-7 / 0.04 = 3.6 x 10-6 N.

ጥያቄ 6

What is the electric potential produced by a point charge of +1.0 μC at a distance of 1.0 mm from it? (Take k = 9.0 x 109 N m2/C2)

  1. A.9.0 kV
  2. B.90 kV
  3. C.9.0 MV
  4. D.90 MV
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ C 9.0 MV

ምክንያቱ

Using V = k Q / r: with Q = 1.0 x 10-6 C and r = 1.0 x 10-3 m, we get V = (9.0 x 109 x 1.0 x 10-6) / (1.0 x 10-3) = 9.0 x 106 V = 9.0 MV.

ጥያቄ 7

Which of the following is true concerning equipotential lines and electric field lines?

  1. A.Equipotential lines can intersect each other.
  2. B.Work is required to move a test charge along an equipotential line.
  3. C.Equipotential lines are always parallel to electric field lines.
  4. D.Equipotential lines are always perpendicular to electric field lines.
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ D Equipotential lines are always perpendicular to electric field lines.

ምክንያቱ

Equipotential lines are always perpendicular to electric field lines. Since the potential is constant along an equipotential line, no work is required to move a charge along it, and two equipotential surfaces never intersect.

ጥያቄ 8

A 4.0 ohm resistor and a 12.0 ohm resistor are connected in parallel. This combination is connected in series with a 5.0 ohm resistor and an 8.0 ohm resistor. What is the total equivalent resistance of the circuit?

  1. A.8.0 ohms
  2. B.16.0 ohms
  3. C.24.0 ohms
  4. D.29.0 ohms
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ B 16.0 ohms

ምክንያቱ

First, find the parallel resistance: Rp = (4.0 x 12.0) / (4.0 + 12.0) = 48 / 16 = 3.0 ohms. Then add the series resistors: Req = 5.0 + 3.0 + 8.0 = 16.0 ohms.

ጥያቄ 9

A flat square surface of area 2.0 cm by 2.0 cm lies in the xy-plane. An electric field is given by E = (20 j + 50 k) N/C. What is the electric flux through this square surface?

  1. A.0.008 N m^2/C
  2. B.0.02 N m^2/C
  3. C.0.20 N m^2/C
  4. D.2.8 N m^2/C
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ B 0.02 N m^2/C

ምክንያቱ

Because the surface is in the xy-plane, its area vector points along the z-axis (k-direction): A = (0.02 m x 0.02 m) k = 4 x 10-4 m2 k. The electric flux is Φ = E • A = (50)(4 x 10-4) = 0.02 N m2/C.

ጥያቄ 10

A galvanometer has a coil resistance of 50 ohms and gives full-scale deflection with a current of 5 mA. What shunt resistance must be connected in parallel to convert it into an ammeter with a full-scale range of 10 A?

  1. A.0.025 ohms
  2. B.0.25 ohms
  3. C.2.5 ohms
  4. D.50.0 ohms
መልሱንና ምክንያቱን ያሳዩ

መልስ፦ A 0.025 ohms

ምክንያቱ

The required shunt resistance is Rsh = [Ig / (I - Ig)] x Rg. Substituting the given values: Rsh = [0.005 / (10 - 0.005)] x 50 = (0.005 / 9.995) x 50 ≈ 0.025 ohms.

መተግበሪያው በዚህ ምዕራፍ ላይ 12 ጥያቄዎች አሉት፤ እየሠሩ ያርምዎታል። እዚህ ያሉት የመጀመሪያዎቹ 10 ናቸው።

የምዕራፍ 6 የመፅሐፍ ገጾች

ምዕራፍ 6 በየትምህርት ሚኒስቴር እትም ከገጽ 217 እስከ ገጽ 286 ይደርሳል።

የትምህርት ሚኒስቴር እትም, እንግሊዝኛ, 338 ገጾች

PDF ያውርዱ

ይህን ምዕራፍ በመተግበሪያው ይለማመዱ

Temari ይህን ምዕራፍ ወደ ጊዜ የተቆረጠለት መልመጃ ይለውጠዋል፣ እየሠሩ ያርምዎታል፤ ያልገባዎትንም የሚያብራራ የ AI አስተማሪ አለ።

በነጻ ይጀምሩ

Temari.et ለ Android ስልኮች መተግበሪያ አለው፤ በ Google Play ላይ በነጻ ይገኛል።

ይግቡመለያዎን ይክፈቱ