የ12ኛ ክፍል ውጤት ወጥቷል፤ ውጤትዎን የሚያዩበት መንገድ

የ12ኛ ክፍል ኬሚስትሪ ምዕራፍ 3

How sulphuric acid is made: the contact process

4 ደቂቃ · የተሠሩ 2 ያለፉ የፈተና ጥያቄዎች

የትምህርቱ ክፍሎች

ትምህርቱን ከዚያ ጀምሮ ለማጫወት አንድ ክፍል ይንኩ።

የ12ኛ ክፍል ኬሚስትሪ ምዕራፍ 3 የ4 ደቂቃ የ Temari ቪዲዮ ትምህርት፦ How sulphuric acid is made: the contact process። 2 ያለፉ የፈተና ጥያቄዎችን ደረጃ በደረጃ ይሠራል። በነጻ ይታያል፤ መለያ አያስፈልግም። ትምህርቱ በእንግሊዝኛ ነው።

ስለ ምዕራፍ 3 ተጨማሪ

የምዕራፉ ገጽ Temari በዚህ ምዕራፍ ላይ ያለውን ሌላውን ይዟል፤ ለምሳሌ አጭር ማስታወሻዎችና የመልመጃ ጥያቄዎች ከመልሶቻቸው ጋር።

የምዕራፍ 3 ገጽ ይክፈቱ

ትምህርቱ የሚናገረው ሁሉ

የትምህርቱ ቃላት በየክፍሉ። ትምህርቱን ከዚያ ጀምሮ ለማጫወት ሰዓቱን ይንኩ።

0:00Introduction

Sulphuric acid is the chemical made in the largest volume in the world. How fast a country uses it is even taken as a measure of how industrialized it is. Today you will learn how industry makes it, in the four steps of the contact process.

0:16The contact process

The contact process has four major steps. First, burn sulphur to make sulphur dioxide. Second, turn the sulphur dioxide into sulphur trioxide.

Third, absorb the sulphur trioxide in concentrated sulphuric acid, to make oleum. Fourth, dilute the oleum with water, to get concentrated sulphuric acid.

0:40Steps 1 and 2

Step one starts with sulphur, a yellow solid. It burns in air: sulphur plus oxygen gives sulphur dioxide.

Step two is the slow one. Two sulphur dioxide plus oxygen gives two sulphur trioxide. To speed it up, the gases are heated to four hundred degrees Celsius, with a catalyst: vanadium five oxide. The gases react when they touch the surface of the catalyst. That contact gives the whole process its name.

1:12Exam question 1ያለፈ ፈተና

Now a real exam question, from the 2018 national exam. At which stage of making sulphuric acid is vanadium five oxide specifically required? Pause the video, and try it.

Vanadium five oxide is the catalyst for the slow step. That is step two, where sulphur dioxide is oxidized to sulphur trioxide. The answer is A. B is step one: sulphur simply burns in air. C is step four, the dilution of oleum. And D is step three, where sulphur trioxide meets sulphuric acid. The catalyst belongs to step two only.

1:57Steps 3 and 4

Now steps three and four. In step three, sulphur trioxide is absorbed into ninety eight percent sulphuric acid. The product is oleum, also called fuming sulphuric acid.

In step four, the oleum is diluted with water. One oleum and one water give two sulphuric acid. So notice: in the contact process, sulphur trioxide never goes straight into water. It always goes into the acid first. The acid that comes out is used to make fertilizers, detergents, plastics and paints, and it is the electrolyte in car batteries.

2:35Exam question 2ያለፈ ፈተና

One more, from the 2011 national exam. Which of these reactions is not involved in the contact process? Pause, and try it.

Match each one to a step. B puts sulphur trioxide straight into water, and the contact process never does that. The answer is B. A is step two, sulphur dioxide to sulphur trioxide. C is step three, making oleum. And D is step four, diluting the oleum.

3:11Summary

So remember. Sulphuric acid is made by the contact process, in four steps. Burn sulphur. Oxidize the sulphur dioxide on a vanadium five oxide catalyst. Absorb the sulphur trioxide in concentrated acid to make oleum. Then dilute the oleum with water. Keep practising questions like these on Temari.et.

ይህን ምዕራፍ በመተግበሪያው ይለማመዱ

Temari ይህን ምዕራፍ ወደ ጊዜ የተቆረጠለት መልመጃ ይለውጠዋል፣ እየሠሩ ያርምዎታል፤ ያልገባዎትንም የሚያብራራ የ AI አስተማሪ አለ።

በነጻ ይጀምሩ

Temari.et ለ Android ስልኮች መተግበሪያ አለው፤ በ Google Play ላይ በነጻ ይገኛል።

ይግቡመለያዎን ይክፈቱ