Grade 10 Information Technology unit 2
IP address classes: read the first number
4 min · 2 past exam questions worked through
Parts of the lesson
Tap a part to play the lesson from there.
A 4-minute Temari video lesson on Grade 10 Information Technology unit 2: IP address classes: read the first number. Free to watch, no account needed.
More on unit 2
The chapter's own page holds the rest of what Temari has on it, such as short notes and practice questions with their answers.
Open the unit 2 pageEverything the lesson says
The lesson's words, part by part. Tap a time to play the lesson from there.
0:00Introduction
Every device on a network has an address, a bit like a phone number. It is written as four numbers with dots between them. Look at the first number, and you can tell the address's class, and its network mask.
0:15What an IP address is
An IP address is a unique address that identifies a device on the internet, or on a local network. IP stands for Internet Protocol, the set of rules for how data is sent.
The common version is IPv4. An IPv4 address is 32 bits long. We write it as four numbers separated by dots, like 192.0.2.146. Each number is eight bits, called an octet. So each one can be anything from 0 to 255.
0:54Five classes, by the first octet
Addresses were split into five classes: A, B, C, D and E. The first octet decides the class. If the first number is from 0 to 127, it is Class A. From 128 to 191, Class B. From 192 to 223, Class C.
Only these three, A, B and C, give addresses to hosts, the computers on a network. Class D, from 224 to 239, is for multicast. Class E, from 240 up, is for experiments.
1:38Practice question 1Past exam
Here is a practice question. A school network is assigned the IP address 201.24.44.32. Based on the first octet value, to which IP address class does this belong? Pause the video, and try it.
Look only at the first octet. It is 201. That lies between 192 and 223, so this is a Class C address. The answer is C. Class A stops at 127. Class B stops at 191. And Class D starts at 224.
2:26The network mask
Now the network mask. Part of every address names the network. The rest names the node, the single device on that network. The network mask shows which part is which.
Each class has a default mask. Class A uses only the first octet for the network, so its mask is 255.0.0.0. Class B uses the first two octets: 255.255.0.0. Class C uses the first three: 255.255.255.0. That is why Class A suits a few very large networks, and Class C suits many small ones.
3:13Practice question 2Past exam
Try this one. What is the default network mask for a Class B IPv4 address? Pause, and try it.
Class B uses its first two octets for the network. So the mask has 255 in the first two places, and zero in the last two. The answer is B, 255.255.0.0. A is the Class A mask. C is the Class C mask. And D is not a default mask for any class.
3:53Summary
So remember. The first octet decides the class. Class A runs to 127, Class B to 191, and Class C to 223. And the default mask puts 255 in every network octet. Keep practising questions like these on Temari.et.
Practise this unit in the app
Temari turns this chapter into timed practice and marks it as you go, with an AI tutor to explain anything that did not land.
Start freeTemari.et is also an Android app, free on Google Play.

