Grade 12 results are out. Where to check yours

Grade 10 Physics unit 3

How far does a wire stretch?

4 min · 2 past exam questions worked through

Parts of the lesson

Tap a part to play the lesson from there.

A 4-minute Temari video lesson on Grade 10 Physics unit 3: How far does a wire stretch?. It works through 2 past exam questions step by step.

More on unit 3

The chapter's own page holds the rest of what Temari has on it, such as short notes and practice questions with their answers.

Open the unit 3 page

Everything the lesson says

The lesson's words, part by part. Tap a time to play the lesson from there.

0:00Introduction

Hang a load on a wire and it stretches. But by how much? Three ideas answer that: stress, strain, and Young's modulus.

0:12Elastic or plastic?

Start with a spring. Pull it with a small force and let go: it returns to its original shape. That property is called elasticity, and a material that behaves this way is elastic.

Now pull with a large force. The spring is permanently deformed, or it breaks. That is plastic behaviour. The line between the two is the elastic limit: the largest stress for which a material still behaves elastically. Go beyond it, and the deformation stays.

0:45Stress and strain

Stress is the force on each square metre of the wire: the force F divided by the cross-sectional area A. Its unit is newtons per square metre.

Strain is how much the wire stretched, compared with how long it was: the extension, delta L, divided by the original length, L nought. A length divided by a length has no unit, so strain is dimensionless.

1:13Exam question 1Past exam

Now a real exam question, from the 2018 Grade 12 national exam. It tests this Grade 10 chapter. A 2.5 metre aluminium wire carries a load, and its strain is 4.0 times ten to the minus three. What is the change in length? Pause the video, and try it.

Strain is delta L over L nought, so delta L is the strain times the length. 4.0 times ten to the minus three, times 2.5, is 0.01 metres. In centimetres, that is 1 centimetre. The answer is D. B is the trap: 0.01 is the answer in metres, not in centimetres. A is ten times too big, and C is ten times too small.

2:06Young's modulus

Below the elastic limit, stress is directly proportional to strain. The constant in that relation is Young's modulus, Y: stress divided by strain. Since strain has no unit, Young's modulus has the same unit as stress, newtons per square metre.

Write it out and you get Y equals F over A, times L nought over delta L. Turn it around, and the extension is F times L nought, over A times Y. So a longer wire stretches more, and a thicker wire, or a stiffer material, stretches less.

2:44Exam question 2Past exam

One more, from the 2013 national exam. A rod 4.00 metres long, with an area of 0.50 square centimetres, stretches 0.20 centimetres under 5000 newtons. Find its Young's modulus. Pause, and try it.

First, metres. 0.50 square centimetres is 5.0 times ten to the minus five square metres, and 0.20 centimetres is 2.0 times ten to the minus three metres. On top, F times L nought is 5000 times 4.00: 2.0 times ten to the four. Underneath, A times delta L is 1.0 times ten to the minus seven. Divide, and Y is 2.0 times ten to the eleven newtons per square metre. The answer is B. The other three are all far too small.

3:42Summary

So remember. Stress is force over area. Strain is the extension over the original length, and it has no unit. Young's modulus is stress over strain, and it only holds below the elastic limit. And always change centimetres into metres first. Keep practising questions like these on Temari.et.

Practise this unit in the app

Temari turns this chapter into timed practice and marks it as you go, with an AI tutor to explain anything that did not land.

Start free

Temari.et is also an Android app, free on Google Play.

Sign inCreate your account