Grade 12 results are out. Where to check yours

Grade 12 Physics unit 4

A changing flux makes a voltage

4 min · 2 past exam questions worked through

Parts of the lesson

Tap a part to play the lesson from there.

A 4-minute Temari video lesson on Grade 12 Physics unit 4: A changing flux makes a voltage. It works through 2 past exam questions step by step.

More on unit 4

The chapter's own page holds the rest of what Temari has on it, such as short notes and practice questions with their answers.

Open the unit 4 page

Everything the lesson says

The lesson's words, part by part. Tap a time to play the lesson from there.

0:00Introduction

Hold a magnet still inside a coil of wire, and nothing happens. Move it, and a current flows. The voltage comes from a change in the field through the coil. Let's turn that into one formula.

0:14Magnetic flux

First, magnetic flux. Flux measures the total magnetic field lines that pass through an area. For a flat surface of area A in a uniform field B, the flux is B times A times the cosine of theta.

Theta is the angle between the field and the line straight out of the surface. Flux is measured in webers. When the field goes straight through, theta is zero, the cosine is one, and the flux is simply B times A.

0:47Electromagnetic induction

In 1831, Michael Faraday found that a changing magnetic field can produce an electromotive force, or emf. An emf is a voltage, and in a closed circuit it drives a current.

1:01Faraday's law

Faraday's law says the emf is directly proportional to the rate of change of the flux. For a coil of N turns, every turn feels the same change. So the emf is N times the change in flux, divided by the time it took. If the question asks for the current, divide the emf by the resistance.

The formula carries a minus sign. That is Lenz's law, and it only gives the direction: the induced current opposes the change. For the size of the emf, you can leave it out.

1:35Exam question 1Past exam

Now a real exam question, from the 2018 national exam. A coil with one hundred turns sits in a field that changes from 0.4 tesla to 0.1 tesla in two seconds. The area is 0.1 square metres. What is the maximum emf? Pause the video, and try it.

Maximum means the field goes straight through the coil, so the cosine is one. The field drops by 0.3 tesla. Times the area, the flux changes by 0.03 webers. Times one hundred turns gives three. Divide by two seconds: 1.5 volts. The answer is A. D is the trap: it uses only the final field, 0.1 tesla, instead of the change.

2:32Three ways to change the flux

Flux is B times A times the cosine of theta. So there are three ways to change it. Change the field, as in that question. Change the area of the coil. Or turn the coil, which changes the angle. Any one of them makes an emf. And the faster the change, the bigger the emf.

2:55Exam question 2Past exam

One more, from the 2017 national exam. A coil sits in a steady field of 0.50 tesla, straight through its plane. Its area grows by four times ten to the minus three square metres in two seconds. What is the emf? Pause, and try it.

This time the area changes. The flux changes by B times the change in area: 0.5 times four times ten to the minus three. That is two times ten to the minus three webers. No number of turns is given, so N is one. Divide by two seconds: one times ten to the minus three volts. The answer is C. D is only the change in area. And B divides the field by the rate, the wrong way round.

3:50Summary

So remember. Flux is B times A times the cosine of theta. Only a change in flux makes an emf. The emf is the number of turns times the change in flux, divided by the time. And the flux can change through the field, the area or the angle. Keep practising questions like these on Temari.et.

Practise this unit in the app

Temari turns this chapter into timed practice and marks it as you go, with an AI tutor to explain anything that did not land.

Start free

Temari.et is also an Android app, free on Google Play.

Sign inCreate your account