Grade 12 results are out. Where to check yours

Grade 10 Physics unit 4

Where the meters go: ammeter in series, voltmeter in parallel

1:11 · Explainer 1 of 2 on unit 4

A short animated Temari explainer on Grade 10 Physics unit 4: Where the meters go: ammeter in series, voltmeter in parallel. Free to watch, no account needed.

Everything the explainer says

The explainer's words, part by part, as its captions show them.

The ammeter goes in series

Here is a simple circuit: a 6 V battery and a 3 Ω resistor.

By Ohm's law, the current is 6 ÷ 3: 2 A.

To measure it, put an ammeter in series, right in the loop, so there is still only one path.

Objects in series have the same current passing through them, so it reads 2 A.

The voltmeter goes in parallel

To measure the voltage across the resistor, connect a voltmeter in parallel, one lead on each side.

Objects in parallel experience the same potential difference, so it reads the resistor's 2 A × 3 Ω: 6 V.

Ammeter in parallel: damaged

Now get them wrong. Connect the ammeter in parallel instead.

It draws most of the current, and gets damaged.

Voltmeter in series: no current

Or connect the voltmeter in series.

It raises the circuit's resistance to nearly infinite, so no current flows at all.

Measuring current and voltage

Ammeter in series, voltmeter in parallel.

Save this one for revision.

The full lesson on unit 4

Temari's longer video lesson on this chapter, with every word written out on its page.

What decides a wire's resistance4 min

More on unit 4

The chapter's own page holds the rest of what Temari has on it, such as short notes and practice questions with their answers.

Open the unit 4 page

Practise this unit in the app

Temari turns this chapter into timed practice and marks it as you go, with an AI tutor to explain anything that did not land.

Start free

Temari.et is also an Android app, free on Google Play.

Sign inCreate your account